F-4 Phantom II 80mm EDF PNP



Aileron: Controlled by two 13g metal gear servos
Airfoil Shape: Semi-Symmetrical
Approx. Flying Speed: 80 mph
Approximate Assembly Time: Less than 1 Hour
CG (Center of Gravity): 6.7" (170mm) back from leading edge of wing measured at the fuselage
Charger: Not included
Completion Level: PNP
Control Throw (Flaps): Take-Off 0.98" (25mm), Landing 1.8" (45mm)
Control Throw - High (Ailerons): 0.79" (20mm)
Control Throw - High (Elevator): Up 1.2" (30mm), Down 0.79" (20mm)
Control Throw - High (Rudder): 0.59" (15mm)
Control Throw - Low (Ailerons): 0.59" (15mm)
Control Throw - Low (Elevator): Up 0.98" (25mm), Down 0.47" (12mm)
Control Throw - Low (Rudder): 0.39" (10mm)
Elevator: 13g metal gear servo control
Expo (Ailerons): Low Rate 5%, High Rate 10%
Expo (Elevator): Low Rate 5%, High Rate 15%
Expo (Rudder): Low Rate 5%, High Rate 10%
Fan Size: 3.1" (80mm) diameter,80mm EDF
Flaps: 13g metal gear servos control
Flying Weight: 6.32 - 6.62lbs (2866 - 3006g)
Length: 53.7" (1364mm)
Material: EPO foam
Minimum Required Radio: 6-channel
Minimum Speed Control: 100A included
Motor Size: 3270-2000Kv
Recommended Motor Battery: 6S 4000-5000mAh LiPo w/ EC5 connector
Retracts: Yes, nose and main gear
Rudder: 13g metal gear servo control
Servos: 7
Transmitter Range: Full
Wing Area: 443.3 sq in (28.6 sq dm)
Wing Loading: 33 - 43oz sq/in (100 - 105g sq/dm)
Wing Tube Length: 17.7" (450mm)
Wing Tube OD: 0.50" (12.8mm)
Wingspan: 35.8" (910mm)